Pricing includes labor and the required Preventative Maintenance Kit for your machine. Pricing does not include Technician travel expenses, which are invoiced after service.
Keep your CNC machine running at peak performance with routine maintenance. Not only will it help to keep your machine in production, it may result in a higher trade or resale value. The Preventive Maintenance is performed by a KOMO factory-trained technician, who will ensure that all required maintenance is performed correctly, and to the latest factory-recommendations.
Once your order is processed, you will be contacted for scheduling.
Preventative Maintenance Kit Includes:
- Metering Units, Compression nuts and sleeves
- Filters
- Belts
- Batteries
Maintenance Service Includes:
• Inspect belts for wear, tension and alignment.
• Replace as required.
• Inspect ball screws/ball nuts/rack and pinion for wear, alignment, galling, pitting, or atypical wear.
Check wiper condition (if applicable) and lubrication.
• Observe spindle/drawbar operation. Perform drawbar clamping set maintenance as required. Examine
tool holders, collets and collet nuts.
• Inspect and adjust pneumatic system components and pressure settings. Check pneumatic line for cracking.
• Check auxiliary spindles/drill units/boring blocks for proper operation and alignment.
• Inspect/adjust counterbalance system, if applicable.
• Lubricate boring block, when required.
• Inspect and replace filters, when required.
• Review customer maintenance records.
• Check drip trays and empty as needed.
• Top off all fluids.
• Inspect lubrication system for proper operation and condition. Replace metering units as required.
• Inspect rails/bearing trucks for wear, corrosion, galling, pitting and burrs; check wiper condition. Clean and
lubricate as required.
• Cycle control pushbuttons, check lights and replace as required; verify all functions, backup parameters,
diagnostics, keep relays, timers, etc. to customer disk.
• Electrical System - inspect panels for connections, contamination and heat; check wiring for cracks.
• Inspect and align tool changer. Replace grippers as required.
• Inspect roller balls and side tables, if applicable.
• Replace batteries, when required.
• Check the function of the MPG and buttons.
• Verify that the E-Stop is functioning properly.
• Inspect vacuum pump and hoses, if applicable.
• Inspect coolant/refrigeration system, if applicable.
• Check function condition of dust shroud, if applicable.
See the attached Preventative Maintenance Flyer for more information.